The Infratech flush mounting option has long been a favourite option among the architects, interior designers and engineers working on today’s most sought-after commercial and residential properties.
flush mounted Infratech heaters are as stylish as they are versatile.
the designer’s choice.
Our team is frequently called upon to collaborate during initial planning stages, in order to provide comprehensive, low-profile flush mounting heating solutions that blend seamlessly into a property’s décor.
Must be installed into a flat ceiling, where the heater can face straight down.
Requires minimum 51mm x 203mm studs
Licensed contractor required to complete a flush mount installation.
Avoid flush mounting the heater close to a ceiling fan or light fixture.
Slimline Series Heaters can not be flush mounted.
RECOMMENDED TO FLUSH MOUNT C OR CD-SERIES HEATERS.
Note: Infratech heaters cannot be flush mounted into a pitched or sloped ceiling.
They can be installed with the edges exposed, or can be partially covered by a drywall, plaster, stucco or tongue-and-groove ceiling treatment.
STUCCO OVER FRAME
TONGUE-AND-GROOVE OVER COLOURED FRAME
COLOURED FRAME OVER FINISHED CEILING
flush mount your heater in four simple steps
Frame the pocket that will house the heater with a one hour-rated fire containment box. Note: Frame and heaters cannot be mounted on a sloped/pitched ceiling.
The junction box must be mounted outside of the lined pocket. You can choose to mount the junction box in a variety of locations, depending upon where you’ll be accessing it.
Install the frame into the finished pocket. You may choose to leave all of the trim exposed, or partially cover it with a decorative ceiling (1.27cm clearance is required from ventilation holes).
Install the heater (heater must face horizontal to the floor) and adjust the tabs to set the heater flush with finished ceiling.
WARNING: FRAME AND HEATERS CANNOT BE MOUNTED ON A SLOPED/PITCHED CEILING. FLUSH MOUNT APPLICATIONS MUST ALWAYS BE INSTALLED WITH HEATERS HORIZONTAL TO THE FLOOR ON A FLAT, NON-SLOPED CEILING.
